As its name suggests, a safety razor makes shaving safer, thanks to its protective guard.
But it has lots of other benefits if you want a smoother shave.
What does a safety razor look like?
If you’ve never seen one, a safety razor has a protective device that’s placed between the skin and the blade’s edge.
Table of Contents
- 1 Other Benefits Of A Safety Razor
- 2 How To Shave Your Beard With A Safety Razor
- 3 How Often You Should Replace Your Safety Razor’s Blade
- 4 How To Clean Your Safety Razor
- 5 Can You Make Your Safety Razor Blades Last Longer?
- 6 Related Questions
- 7 Conclusion
Other Benefits Of A Safety Razor
When you use a safety razor, you’re really using a sharp blade that doesn’t need to make multiple passes over your skin.
This can drastically reduce the impact of the shaving on sensitive skin. Plus, you know how you’re always encouraged to rinse the razor between passes?
With a safety razor, you don’t have to worry about it clogging up with shaving cream or gel, which also minimizes your risk of sending bacteria into your pores.
If you’ve ever battled with your current razor when it came to trying to shave hair in difficult spots, such as under your nose, then you’ll love the safety razor even more. Thanks to how it’s angled during use, it can easily shave areas such as underneath your nose and around your neck.
However, don’t be fooled – despite its name, a safety razor can be dangerous when put in the wrong hands. The blade is level with your skin and it’s sharp.
You have to pay special attention to what you’re doing – shaving with a safety razor isn’t good for those frazzled mornings when you want to quickly shave and leave the house – but when mastered, you’ll never look back or use anything else.
How To Shave Your Beard With A Safety Razor
Step One: Shower
You have to prepare your skin for shaving so that it’s soft and the hair follicles are smoothed so that they’ll be easier to pluck out of the skin. A good way to do this is to have a warm shower.
Use a facial cleanser or soap on your beard to give it a good clean. You might also want to exfoliate your skin to remove dead skin cells that can accumulate and dry out your skin.
Step Two: Apply Shaving Cream
Whether you use shaving cream or gel, now’s the time to put it on your beard.
Step Three: Hold The Razor At An Angle
A safety razor is made out of steel, so it’s heavy to handle. But this heaviness is a good thing. If you know how to handle it, it will be able to give you a much closer shave.
Take your safety razor and hold it at a 30-degree angle. This makes cutting much more effective because you’re essentially angling the protective bar of the razor so that it’s out of the way.
This means that the blade can reach your beard.
Step Four: Hold It Differently Depending On Its Length
There are some extra tips you should follow when holding your safety razor, depending on its length. If you have a safety razor with a short handle, you need to put your fingers lower down on the handle.
As you make the first few passes in the direction of hair growth, you should hold the safety razor between your index finger, middle finger, and thumb. If you have to make a pass against the grain, turn the razor around and hold it with the same fingers but in the same way you would hold a pencil.
If you have a razor with a long handle, hold it with your index finger, middle finger, ring finger, and thumb. When you shave in the direction of hair length, hold the handle with those three fingers on one side of it and your thumb on the other side.
Then, when you shave against the grain, you should turn the razor around and hold it like a pencil (like you would with a shorter handle). However, make it rest against your ring finger.
Step Five: Use Short Passes
When using a safety razor, you want to use short passes instead of longer ones. This reduces your risk of cutting yourself. And remember: always shave in the direction of hair growth, at least for the first pass over the hair.
It’s also a good idea to follow this guideline: the finer and shorter your hair, the longer passes you can make as you become more comfortable with the razor. If you have a longer beard, then you really want to slow down and do shorter passes.
Using a safety razor might take you more time than if you had to use a different type of razor, but it’s worth it because of the quality shave you’ll get from it.
Step Six: Don’t Apply Lots Of Pressure
You don’t need to press down a lot on your razor. This is actually best to avoid as it can cause injuries because the blade is so sharp.
Hold it firmly but gently. As long as you’re holding it at a 30-degree angle, it will be able to move along your skin and give you a smooth shave without the nicks and cuts.
Step Seven: Go Against The Grain (Optional)
If one pass with the razor across your face in the direction of hair growth didn’t give you a close enough shave, you should then turn the razor around and carefully shave against the hair growth.
How Often You Should Replace Your Safety Razor’s Blade
Safety razors can be a little more high-maintenance than other types of razors because you have to change their blades very regularly.
If you shave three times a week or daily, then you’ll need to change your blade twice a week. On the other hand, if you shave less than three times a week, you can replace the blade once a week.
While that might sound like a lot, the good news is that safety razor blades are cheaper than cartridge razors.
How To Clean Your Safety Razor
As with any razor, how you look after it will help you to make it last longer.
To clean your safety razor, you don’t need to do much. It should go without saying but never try to clean the razor’s blades. This can be dangerous and it’s just not a good use of your time.
It’s easier to replace them with new ones.
To clean your razor:
- Take the razor apart and put the pieces aside.
- Fill a sink with soapy water.
- Take a cloth and dip it in the water, then clean the different razor parts.
- If there are any hard-to-reach places, you can use a toothbrush to clean them.
- Rinse the razor with water and hang it somewhere safe to dry. This is the better option than using abrasive products to dry it as items such as rough cloths or paper towels can leave scratches.
Can You Make Your Safety Razor Blades Last Longer?
Although you don’t want to use a dull blade as that can cause irritation because you have to go over the same hair over and over again, there are ways to increase the lifespan of your blades.
It’s all about how well you maintain them. Here are three things you can do to boost your razor blade’s lifespan.
- Always dry the blade after using it. If you leave some moisture on the blade, this will cause the metal to oxidize so it becomes blunt.
- You can also soak the razor blade to keep it in good shape. Fill a cup with vinegar and water, and place the blade in there. This liquid will remove scum from the razor, and it’s a good way to deep-clean your razor if you’ve been a bit negligent with it lately.\
- Store blades in a dry, dark place. You might just leave your razor on the bathroom sink, but the bathroom’s the worst place to store a razor because of its humidity. Place your safety razor in a resealable bag and put it in a dark drawer.
Is a safety razor the same as an old-school razor?
Your grandfather might’ve used a safety razor.
This type of razor became popular in the early 1900s but it’s having a resurgence now because of how it gives you a professional shave.
How has the safety razor changed over the years?
There have been many innovations in safety razors since it hit the scene.
These include shorter handles, narrower blades, and even extra elements such as lubricating strips.
How to use safety razor is something that you might be wondering about, especially if you want a much smoother, closer shave.
After reading this article, you know all the information you need on how to shave with a safety razor like a pro, prevent injuries, and get the best shave of your life.